Проблема была в том что еее-контрол ну никак не хотел работать
то демон не работал должны образом, то каких-то файлов не было, вообщем много всего.
Сегодня я таки достиг нужного результата.
Итак, пока не забыл расскажу.
emerge -av eee-control
поставится но работать не будет, станет ругаться на отсутвие
/etc/init.d/hotkey-setup
Прилагаю свой
#!/bin/sh
### BEGIN INIT INFO
# Provides: hotkey-setup
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Default-Start: 2 3 4 5
# Default-Stop: 1
# Short-Description: Set up laptop keys to generate keycodes.
### END INIT INFO
test -x /usr/sbin/dumpkeycodes || exit 0
xorg_driver() {
vendor=$(lspci | grep VGA | head -1)
case $vendor in
*Intel*)
driver=intel
;;
*AMD*|*ATI*)
driver=ati
;;
esac
echo $driver
}
do_video () {
VIDEO=`xorg_driver`
case $VIDEO in
intel|ati)
for x in /proc/acpi/video/*/DOS; do
if [ -e "$x" ]; then
echo -n 7 >$x;
fi
done
;;
esac
}
case "$1" in
start)
# This entire block does nothing on desktops right now
if laptop-detect; then
do_video
fi
;;
restart|force-reload)
$0 stop || true
$0 start
;;
esac
exit 0
Потом не забыть сделать chmod +x /etc/init.d/hotkey-setup
Далее в ядро вставить поддержку DMI
cd /usr/src/linux
cat .config | grep DMI
CONFIG_DMI=y
CONFIG_DMIID=y
Далее скорее всего машина будет ругаться на /lib/lsb/init-functions
Этого файлика тоже в нашей генте нет.
Прилагаю свой.
# /lib/lsb/init-functions for Debian -*- shell-script -*-
#
#Copyright (c) 2002-08 Chris Lawrence
#All rights reserved.
#
#Redistribution and use in source and binary forms, with or without
#modification, are permitted provided that the following conditions
#are met:
#1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
#2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#3. Neither the name of the author nor the names of other contributors
# may be used to endorse or promote products derived from this software
# without specific prior written permission.
#
#THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
#IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
#WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
#LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
#BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
#WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
#OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
#EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
start_daemon () {
local force nice pidfile exec i
force=0
nice=0
pidfile=/dev/null
OPTIND=1
while getopts fn:p: opt ; do
case "$opt" in
f) force=1;;
n) nice="$OPTARG";;
p) pidfile="$OPTARG";;
esac
done
shift $(($OPTIND - 1))
if [ "$1" = '--' ]; then
shift
fi
exec="$1"; shift
if [ $force = 1 ]; then
/sbin/start-stop-daemon --start --nicelevel $nice --quiet --startas $exec --pidfile /dev/null --oknodo -- "$@"
elif [ $pidfile ]; then
/sbin/start-stop-daemon --start --nicelevel $nice --quiet --exec $exec --oknodo --pidfile "$pidfile" -- "$@"
else
/sbin/start-stop-daemon --start --nicelevel $nice --quiet --exec $exec --oknodo -- "$@"
fi
}
pidofproc () {
local pidfile line i pids= status specified pid
pidfile=
specified=
OPTIND=1
while getopts p: opt ; do
case "$opt" in
p) pidfile="$OPTARG"; specified=1;;
esac
done
shift $(($OPTIND - 1))
base=${1##*/}
if [ ! "$specified" ]; then
pidfile="/var/run/$base.pid"
fi
if [ -n "${pidfile:-}" -a -e "$pidfile" ]; then
read pid < "$pidfile"
if [ -n "${pid:-}" ]; then
if $(kill -0 "${pid:-}" 2> /dev/null); then
echo "$pid"
return 0
elif ps "${pid:-}" >/dev/null 2>&1; then
echo "$pid"
return 0 # program is running, but not owned by this user
else
return 1 # program is dead and /var/run pid file exists
fi
fi
fi
if [ -x /bin/pidof -a ! "$specified" ]; then
status="0"
/bin/pidof -o %PPID -x $1 || status="$?"
if [ "$status" = 1 ]; then
return 3 # program is not running
fi
return 0
fi
return 4 # program or service is unknown
}
# start-stop-daemon uses the same algorithm as "pidofproc" above.
killproc () {
local pidfile sig status base i name_param is_term_sig
pidfile=
name_param=
is_term_sig=no
OPTIND=1
while getopts p: opt ; do
case "$opt" in
p) pidfile="$OPTARG";;
esac
done
shift $(($OPTIND - 1))
base=${1##*/}
if [ ! $pidfile ]; then
name_param="--name $base --pidfile /var/run/$base.pid"
else
name_param="--pidfile $pidfile"
fi
sig=$(echo ${2:-} | sed -e 's/^-\(.*\)/\1/')
sig=$(echo $sig | sed -e 's/^SIG\(.*\)/\1/')
if [ -z "$sig" -o "$sig" = 15 -o "$sig" = TERM ]; then
is_term_sig=yes
fi
status=0
if [ ! "$is_term_sig" = yes ]; then
if [ -n "$sig" ]; then
/sbin/start-stop-daemon --stop --signal "$sig" --quiet $name_param || status="$?"
else
/sbin/start-stop-daemon --stop --quiet $name_param || status="$?"
fi
else
/sbin/start-stop-daemon --stop --quiet --oknodo $name_param || status="$?"
fi
if [ "$status" = 1 ]; then
if [ -n "$sig" ]; then
return 0
fi
return 3 # program is not running
fi
if [ "$status" = 0 -a "$is_term_sig" = yes -a "$pidfile" ]; then
pidofproc -p "$pidfile" "$1" >/dev/null || rm -f "$pidfile"
fi
return 0
}
# Return LSB status
status_of_proc () {
local pidfile daemon name status
pidfile=
OPTIND=1
while getopts p: opt ; do
case "$opt" in
p) pidfile="$OPTARG";;
esac
done
shift $(($OPTIND - 1))
if [ -n "$pidfile" ]; then
pidfile="-p $pidfile"
fi
daemon="$1"
name="$2"
status="0"
pidofproc $pidfile $daemon >/dev/null || status="$?"
if [ "$status" = 0 ]; then
log_success_msg "$name is running"
return 0
else
log_failure_msg "$name is not running"
return $status
fi
}
log_use_fancy_output () {
TPUT=/usr/bin/tput
EXPR=/usr/bin/expr
if [ -t 1 ] && [ "x$TERM" != "" ] && [ "x$TERM" != "xdumb" ] && [ -x $TPUT ] && [ -x $EXPR ] && $TPUT hpa 60 >/dev/null 2>&1 && $TPUT setaf 1 >/dev/null 2>&1; then
[ -z $FANCYTTY ] && FANCYTTY=1 || true
else
FANCYTTY=0
fi
case "$FANCYTTY" in
1|Y|yes|true) true;;
*) false;;
esac
}
log_success_msg () {
if [ -n "${1:-}" ]; then
log_begin_msg $@
fi
log_end_msg 0
}
log_failure_msg () {
if [ -n "${1:-}" ]; then
log_begin_msg $@
fi
log_end_msg 1 || true
}
log_warning_msg () {
if [ -n "${1:-}" ]; then
log_begin_msg $@
fi
log_end_msg 255 || true
}
#
# NON-LSB HELPER FUNCTIONS
#
# int get_lsb_header_val (char *scriptpathname, char *key)
get_lsb_header_val () {
if [ ! -f "$1" ] || [ -z "${2:-}" ]; then
return 1
fi
LSB_S="### BEGIN INIT INFO"
LSB_E="### END INIT INFO"
sed -n "/$LSB_S/,/$LSB_E/ s/# $2: \(.*\)/\1/p" $1
}
# int log_begin_message (char *message)
log_begin_msg () {
if [ -z "${1:-}" ]; then
return 1
fi
echo -n "$@"
}
# Sample usage:
# log_daemon_msg "Starting GNOME Login Manager" "gdm"
#
# On Debian, would output "Starting GNOME Login Manager: gdm"
# On Ubuntu, would output " * Starting GNOME Login Manager..."
#
# If the second argument is omitted, logging suitable for use with
# log_progress_msg() is used:
#
# log_daemon_msg "Starting remote filesystem services"
#
# On Debian, would output "Starting remote filesystem services:"
# On Ubuntu, would output " * Starting remote filesystem services..."
log_daemon_msg () {
if [ -z "${1:-}" ]; then
return 1
fi
log_daemon_msg_pre "$@"
if [ -z "${2:-}" ]; then
echo -n "$1:"
return
fi
echo -n "$1: $2"
log_daemon_msg_post "$@"
}
# #319739
#
# Per policy docs:
#
# log_daemon_msg "Starting remote file system services"
# log_progress_msg "nfsd"; start-stop-daemon --start --quiet nfsd
# log_progress_msg "mountd"; start-stop-daemon --start --quiet mountd
# log_progress_msg "ugidd"; start-stop-daemon --start --quiet ugidd
# log_end_msg 0
#
# You could also do something fancy with log_end_msg here based on the
# return values of start-stop-daemon; this is left as an exercise for
# the reader...
#
# On Ubuntu, one would expect log_progress_msg to be a no-op.
log_progress_msg () {
if [ -z "${1:-}" ]; then
return 1
fi
echo -n " $@"
}
# int log_end_message (int exitstatus)
log_end_msg () {
# If no arguments were passed, return
if [ -z "${1:-}" ]; then
return 1
fi
retval=$1
log_end_msg_pre "$@"
# Only do the fancy stuff if we have an appropriate terminal
# and if /usr is already mounted
if log_use_fancy_output; then
RED=`$TPUT setaf 1`
YELLOW=`$TPUT setaf 3`
NORMAL=`$TPUT op`
else
RED=''
YELLOW=''
NORMAL=''
fi
if [ $1 -eq 0 ]; then
echo "."
elif [ $1 -eq 255 ]; then
/bin/echo -e " ${YELLOW}(warning).${NORMAL}"
else
/bin/echo -e " ${RED}failed!${NORMAL}"
fi
log_end_msg_post "$@"
return $retval
}
log_action_msg () {
echo "$@."
}
log_action_begin_msg () {
echo -n "$@..."
}
log_action_cont_msg () {
echo -n "$@..."
}
log_action_end_msg () {
log_action_end_msg_pre "$@"
if [ -z "${2:-}" ]; then
end="."
else
end=" ($2)."
fi
if [ $1 -eq 0 ]; then
echo "done${end}"
else
if log_use_fancy_output; then
RED=`$TPUT setaf 1`
NORMAL=`$TPUT op`
/bin/echo -e "${RED}failed${end}${NORMAL}"
else
echo "failed${end}"
fi
fi
log_action_end_msg_post "$@"
}
# Hooks for /etc/lsb-base-logging.sh
log_daemon_msg_pre () { :; }
log_daemon_msg_post () { :; }
log_end_msg_pre () { :; }
log_end_msg_post () { :; }
log_action_end_msg_pre () { :; }
log_action_end_msg_post () { :; }
FANCYTTY=
[ -e /etc/lsb-base-logging.sh ] && . /etc/lsb-base-logging.sh || true
Но и после этих манипуляций еще не все!
в автозугрузки нужно поставить модуль
p4_clockmod для регулировки частоты проца.
Вот вроде бы пока все.
Чуть попозже дополню.
